This article presents detailed examples illustrating the utilization of attributes when customizing an item, offering a comprehensive guide on how to effectively apply them. Additionally, it provides clear instructions on how to navigate our attribute database in order to locate and select the appropriate attributes and respective values for your customization needs.
Each item construction example links to the article where you can find the attribute and its possible values. These examples can be used as a basis for better understanding how to use and find the necessary attributes.
Construction - Structures and configurations with Template
Below are the most generic examples of the library with the most used attributes, divided into Base, Wall, Tall, Vanity and Wood Hood. To start creating your cabinet, you need to define what type you want to use, for example: Standard, Corner Square, Corner Blind, Corner Diagonal and etc, these options are listed below.
Base Standard
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Base. The tables in this document are divided into categories. So, if you want to build a Base Standard item, you need to open this category and look for the required attributes as well as their proposed values.
To edit the structure and configuration into the template:
Example:
TEMPLATES_BASE_STANDARD_RECTANGULAR_CONFIG = Door / Drawer
TEMPLATES_BASE_STANDARD_RECTANGULAR_STRUCTURE = Standard Base
COMMON_STYLECABINET_TOP = Full Top
To edit the Structure in more details:
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Corner Blocks
COMMON_STYLECABINET_BACK = Grooved Back Outside
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.75
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 06
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 06
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the articles Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 0.5
COMMON_TOEKICK_HEIGHT = 6
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_DECORATIVE_LEG_STYLE = Foot 01
COMMON_DECORATIVE_LEG_LEFT_BACK = True
COMMON_DECORATIVE_LEG_LEFT_FRONT = True
COMMON_DECORATIVE_LEG_RIGHT_BACK = True
COMMON_DECORATIVE_LEG_RIGHT_FRONT = True
COMMON_LEG_WIDTH = 2
COMMON_LEG_DEPTH = 2
COMMON_TOEKICK_HEIGHT = 4
To edit the style toekick and use a decorative style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_DECORATIVE_TOEKICK_STYLE = Decorative Toekick 27
To edit the style toekick and use a floating style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
Note: With this option, the item seems to be floating and there is no visual structure between it and the floor.
To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the horizontal divisions, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example 1:
COMMON_MEASURE_CONFWIDTH1 = 12
COMMON_MEASURE_CONFWIDTH2 = 12
COMMON_MEASURE_CONFWIDTH3 =12
Note: These attributes are used in cases where the configuration is separated by dividers.
Example 2:
COMMON_MEASURE_CONFWIDTH1 = 15
COMMON_MEASURE_CONFWIDTH3 =15
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 1
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example 1:
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
Example 2:
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM2 = 0.5
COMMON_INTER_OVERLAY_TOP2 = 0.5
COMMON_INTER_OVERLAY_BOTTOM3 = 0.5
COMMON_INTER_OVERLAY_TOP3 = 0.5
COMMON_INTER_OVERLAY_BOTTOM4 = 0.5
COMMON_INTER_OVERLAY_TOP4 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 2
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of doors, style door and whether not the doors have a center stile, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Visibility.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_NUMFRONTDOOR1 = 2
COMMON_NUMPANEL_DOOR = 2
COMMON_BUTTDOORS = True
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEDOOR_HANDLESTYLE = 104
COMMON_HANDLE_WIDTH = 4
COMMON_HANDLE_HEIGHT = 0.5
COMMON_HANDLE_DEPTH = 1
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Organizer
COMMON_DOOR_ACCESS_HEIGHT1 = 15
COMMON_DOOR_ACCESS_DEPTH1 = 6
COMMON_DOOR_ACCESS_WIDTH1 = 12
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESSORY1 until COMMON_DOOR_ACCESSORY14
COMMON_DOOR_ACCESS_HEIGHT1 until COMMON_DOOR_ACCESS_HEIGHT8
To edit the accessories position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_DOOR_ACCESS_ORIGINX_1 = 2
COMMON_DOOR_ACCESS_ORIGINZ_1 = 3
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESS_ORIGINX_1 until COMMON_DOOR_ACCESS_ORIGINX_8
To edit the shelves quantity and dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_QUANTITY_SHELF_1 = 3
COMMON_SHELF_DEPTH = 25
To edit the shelves visibility, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility.
Example:
COMMON_SHELF_VISIBILITY = False
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right:
COMMON_SHELF_VISIBILITY until COMMON_SHELF_VISIBILITY_5
To edit the drawer style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWERSTYLE_GEN = 12
COMMON_DRAWER_INSET = 0.75
COMMON_DRAWERSTYLE_GEN = 12
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 1
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 1
To edit the height of drawer front and drawer box, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_DRAWERBOX_HEIGHT = 4
COMMON_DRAWER01_HEIGHT = 6
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom) is calculated automatically:
COMMON_DRAWER01_HEIGHT until COMMON_DRAWER14_HEIGHT
COMMON_MEASURE_DRAWERBOX_HEIGHT until COMMON_MEASURE_DRAWERBOX14_HEIGHT
To edit the drawer box depth, use the attribute listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_DEPTH = 5
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom):
COMMON_DRAWERBOX1_DEPTH until COMMON_DRAWERBOX6_DEPTH
To edit the visibility of drawer box, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility.
Example:
COMMON_DRAWERBOX1 = False
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX1 until COMMON_DRAWERBOX14
To edit the handle style and the dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWER_HANDLESTYLE = 107
COMMON_DRAWERHANDLE_HEIGHT = 0.6
COMMON_DRAWERHANDLE_DEPTH = 1
COMMON_DRAWERHANDLE_WIDTH = 4
To edit the handle quantity, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWER_PULL_1 = 2
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWER_PULL_1 until COMMON_DRAWER_PULL_14
To add drawer box accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_ACCESSORY = Coffee Pod Insert
COMMON_ACCESSORY_HEIGHT1 = 1.5
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX_ACCESSORY until COMMON_DRAWERBOX9_ACCESSORY
COMMON_ACCESSORY_HEIGHT1 until COMMON_ACCESSORY_HEIGHT14
To edit the drawer style in multiple horizontal drawers, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2.
Example:
COMMON_DRAWERSTYLE1 = 12
COMMON_DRAWERSTYLE2 = 111
COMMON_DRAWERSTYLE3 = 260
Base End Angle
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Base. The tables in this document are divided into categories. So, if you want to build a Base End Angle item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_BASE_END_STRUCTURE = End Angle Base
TEMPLATES_BASE_END_CONFIG= Base End Full Height Door
COMMON_STYLECABINET_TOP = Full Top
- To edit the Structure in more details:
To edit the depth of the corner structure, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEENDANGLE_DEPTH = 10
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Back Corner Blocks
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.50
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 06
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 06
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 1
COMMON_TOEKICK_HEIGHT = 6
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_LEG_STYLE = Foot 09
COMMON_LEG_WIDTH = 2
COMMON_LEG_DEPTH = 2
COMMON_LEG_QUANTITY = 4
COMMON_TOEKICK_HEIGHT = 5
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_TOP_OVERLAY = 1.5
COMMON_BOTTOM_OVERLAY = 1.5
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 2
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of panels door, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Style 2.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_NUMPANEL_DOOR = 2
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEDOOR_HANDLESTYLE = 107
COMMON_HANDLE_WIDTH = 3
COMMON_HANDLE_HEIGHT =0.5
COMMON_HANDLE_DEPTH = 1
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Spice Rack 01
COMMON_DOOR_ACCESS_HEIGHT1 = 18
COMMON_DOOR_ACCESS_DEPTH1 = 7
COMMON_DOOR_ACCESS_WIDTH1 = 10
Note 1: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESSORY1 until COMMON_DOOR_ACCESSORY14
COMMON_DOOR_ACCESS_HEIGHT1 until COMMON_DOOR_ACCESS_HEIGHT8
To edit the accessorie position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_DOOR_ACCESS_ORIGINX_1 = 1
COMMON_DOOR_ACCESS_ORIGINZ_1 = 3
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESS_ORIGINX_1 until COMMON_DOOR_ACCESS_ORIGINX_8
To edit the shelves style, quantity and dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity, Attributes: Item Construction - Cabinet Base and Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_BASE_END_SHELF = Shelf
COMMON_QUANTITY_SHELF_1 = 3
COMMON_SHELF_DEPTH = 10
To edit the shelves visibility, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility.
Example:
COMMON_SHELF_VISIBILITY = False
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right:
COMMON_SHELF_VISIBILITY until COMMON_SHELF_VISIBILITY_5
To edit the drawer style and dimensions of drawer rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWERSTYLE_GEN = 12
COMMON_DRAWER_INSET = 0.75
COMMON_DRAWER01_HEIGHT = 7
COMMON_DRAWERSTYLE_GEN = 12
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 1
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
COMMON_DRAWER01_HEIGHT = 7
To edit the height of drawer front and drawer box, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_DRAWERBOX_HEIGHT = 4
COMMON_DRAWER01_HEIGHT = 6
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom) is calculated automatically:
COMMON_DRAWER01_HEIGHT until COMMON_DRAWER14_HEIGHT
COMMON_MEASURE_DRAWERBOX_HEIGHT until COMMON_MEASURE_DRAWERBOX14_HEIGHT
To edit the drawer box depth, use the attribute listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_DEPTH = 5
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom):
COMMON_DRAWERBOX1_DEPTH until COMMON_DRAWERBOX6_DEPTH
To edit the drawer box visibility, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility.
Example:
COMMON_DRAWERBOX1 = False
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX1 until COMMON_DRAWERBOX14
To edit the handles style and the dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWER_HANDLESTYLE = 107
COMMON_DRAWERHANDLE_HEIGHT = 0.5
COMMON_DRAWERHANDLE_DEPTH = 1
COMMON_DRAWERHANDLE_WIDTH = 4
To edit the handle quantity, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWER_PULL_1 = 2
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWER_PULL_1 until COMMON_DRAWER_PULL_14
To add the drawer box accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_ACCESSORY = Coffee Pod Insert
COMMON_ACCESSORY_HEIGHT1 = 1.5
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX_ACCESSORY until COMMON_DRAWERBOX9_ACCESSORY
COMMON_ACCESSORY_HEIGHT1 until COMMON_ACCESSORY_HEIGHT14
Base Corner Diagonal
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Base. The tables in this document are divided into categories. So, if you want to build a Base Corner Diagonal, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_BASE_CORNER_DIAGONAL_STRUCTURE = Corner Diagonal Base
TEMPLATES_BASE_CORNER_DIAGONAL_CONFIG = Corner Diagonal Full Door Left
COMMON_STYLECABINET_TOP = Full Top
- To edit the Structure in more details:
To edit the depth of the corner structure, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Construction - Clearances .
Example:
COMMON_BASECORNER_DEPTH1 = 24
COMMON_BASECORNER_DEPTH2 = 24
COMMON_CLEARANCE_BASE_DIAGONALCORNER_BACK = 10
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Corner Blocks
COMMON_STYLECABINET_BACK = Grooved Back Left and Right
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.75
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_DIAGONAL_BACK = 0.3
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 05
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 05
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 0.5
COMMON_TOEKICK_HEIGHT = 6
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_LEG_COMPOSITION_TYPE = Corner Diagonal
COMMON_LEG_STYLE = Foot 10
COMMON_LEG_WIDTH = 2
COMMON_LEG_DEPTH = 2
COMMON_TOEKICK_HEIGHT = 4
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 1
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_TOP_OVERLAY = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 2
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of panels door, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Style 2.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_NUMPANEL_DOOR = 2
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEDOOR_HANDLESTYLE = 107
COMMON_HANDLE_WIDTH = 3
COMMON_HANDLE_HEIGHT =0.5
COMMON_HANDLE_DEPTH = 1
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Spice Rack 01
COMMON_DOOR_ACCESS_HEIGHT1 = 18
COMMON_DOOR_ACCESS_DEPTH1 = 7
COMMON_DOOR_ACCESS_WIDTH1 = 10
Note 1: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESSORY1 until COMMON_DOOR_ACCESSORY14
COMMON_DOOR_ACCESS_HEIGHT1 until COMMON_DOOR_ACCESS_HEIGHT8
To edit the accessorie position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_DOOR_ACCESS_ORIGINX_1 = 1
COMMON_DOOR_ACCESS_ORIGINZ_1 = 3
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESS_ORIGINX_1 until COMMON_DOOR_ACCESS_ORIGINX_8
Wall Standard
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Wall. The tables in this document are divided into categories. So, if you want to build a Wall Standard item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_WALL_STANDARD_RECTANGULAR_STRUCTURE = Standard Wall
TEMPLATES_WALL_STANDARD_RECTANGULAR_CONFIG = Doors / Doors
- To edit the Structure in more details:
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Front Stretcher Vertical
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.5
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 03
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 03
COMMON_MEASURE_THICKNESS_SIDE = 0.5
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To add and edit the attached shape, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Positioning, Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Quantity.
Example:
COMMON_ATTACHED_SHAPE_STYLE_1 = Double Wine Bottle Rack
COMMON_DECORATIVE_ITEMS_ORIGIN = Bottom
COMMON_ATTACHED_HEIGHT = 10
COMMON_ATTACHED_WIDTH = 25
COMMON_ATTACHED_DEPTH = 11
COMMON_ATTACHED_SHAPE_GENERAL_QUANTITY = 9
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below,you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the horizontal divisions, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example 1:
COMMON_MEASURE_CONFWIDTH1 = 17
COMMON_MEASURE_CONFWIDTH2 = 17
COMMON_MEASURE_CONFWIDTH3 =17
Note: this attribute is used in cases where the configuration is separated by dividers.
Example 2:
COMMON_MEASURE_CONFWIDTH1 = 12
COMMON_MEASURE_CONFWIDTH3 =12
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 1
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example 1:
COMMON_BOTTOM_OVERLAY = 1
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 1
Exemple 2:
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM2 = 0.5
COMMON_INTER_OVERLAY_TOP2 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
To edit the door style, door center panel style, dimensions of door rail and stile (when available), number of doors and whether not the doors have a center stile, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2, Attributes: Item Configuration - Quantity, Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 19
COMMON_STYLE_WALLDOOR = Glass
COMMON_STYLE_WALLDOOR_2 = Glass
COMMON_NUMFRONTDOOR1 = 2
COMMON_BUTTDOORS = True
COMMON_BUTTDOORS_2 = True
COMMON_VDOOR_FRONT_ORIENTATION = HORIZONTAL
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 322
COMMON_HANDLE_WIDTH = 2
COMMON_HANDLE_HEIGHT = 2
COMMON_HANDLE_DEPTH = 2
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_SHELF_VISIBILITY = False
COMMON_SHELF_VISIBILITY_2 = False
COMMON_CABINET_ACCESSORY_STYLE1 = Wire Shelves
COMMON_CABINET_ACCESSORY_STYLE2 = Spice Rack
COMMON_CABINET_ACCESSORY_WIDTH1 = 15
COMMON_CABINET_ACCESSORY_WIDTH2 = 20
COMMON_CABINET_ACCESSORY_DEPTH1 = 8
COMMON_CABINET_ACCESSORY_DEPTH2 = 5
COMMON_CABINET_ACCESSORY_HEIGHT1 = 10
COMMON_CABINET_ACCESSORY_HEIGHT2 = 15
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_CABINET_ACCESSORY_STYLE1 until COMMON_CABINET_ACCESSORY_STYLE5
To edit the accessories position, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_CABINET_ACCESSORY_ORIGIN = Middle Bottom
COMMON_CABINET_ACCESSORY_ORIGIN2 = Right Bottom
COMMON_CABINET_ACCESSORY_POSITIONX1 = 1
COMMON_CABINET_ACCESSORY_POSITIONX2 = 5
COMMON_CABINET_ACCESSORY_POSITIONY1 = 0.5
COMMON_CABINET_ACCESSORY_POSITIONY2 = 2
COMMON_CABINET_ACCESSORY_POSITIONZ1 = 1
COMMON_CABINET_ACCESSORY_POSITIONZ1= 1
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_CABINET_ACCESSORY_ORIGIN until COMMON_CABINET_ACCESSORY_ORIGIN5
To edit the shelves quantity and dimension, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_QUANTITY_SHELF_1 = 1
COMMON_QUANTITY_SHELF_2 = 3
COMMON_SHELF_DEPTH = 5
COMMON_SHELF_DEPTH_2 = 8
Note: If you have a configuration with more than one shelf, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_QUANTITY_SHELF_1 until COMMON_QUANTITY_SHELF_6
Wall End Angle
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Wall, The tables in this document are divided into categories. So, if you want to build a Wall End Angle item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_WALL_END_CONFIG = Full Height Left Door End Angle
TEMPLATES_WALL_END_STRUCTURE = End Angle Wall 2
- To edit the Structure in more details:
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Back Stretcher
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.5
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_WALL_END_ENDPANEL_R = Wall Panel
TEMPLATES_WALL_END_ENDPANEL_L = Wall Panel
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the clearances frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 1
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_BOTTOM_OVERLAY = 1.5
COMMON_TOP_OVERLAY = 1.5
To edit the door style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 12
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
To edit the door style and door center panel style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2
Example:
COMMON_WALL_DOORSTYLE = 12
COMMON_STYLE_WALLDOOR = Glass
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 322
COMMON_HANDLE_WIDTH = 2
COMMON_HANDLE_HEIGHT = 2
COMMON_HANDLE_DEPTH = 2
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Spice Rack 01
COMMON_DOOR_ACCESS_HEIGHT1 = 20
COMMON_DOOR_ACCESS_DEPTH1 = 10
COMMON_DOOR_ACCESS_WIDTH1 = 10
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
Example:
COMMON_CABINET_ACCESSORY_STYLE1 until COMMON_CABINET_ACCESSORY_STYLE5
To edit the accessories position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_CABINET_ACCESSORY_POSITIONX1 = 5
COMMON_CABINET_ACCESSORY_POSITIONZ1 = 3
To edit the shelves style, quantity and dimension, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall, Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_WALL_END_SHELF = Shelf End Angle Base
COMMON_QUANTITY_SHELF_1 = 2
COMMON_SHELF_DEPTH = 15
Note: If you have a configuration with more than one shelf, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_QUANTITY_SHELF_1 until COMMON_QUANTITY_SHELF_6
Wall Corner Square
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Wall. The tables in this document are divided into categories. So, if you want to build a Wall Corner Square item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_WALL_CORNER_90_STRUCTURE = 90 Corner Wall w/ Straight Back
TEMPLATES_WALL_CORNER_90_CONFIG = Square Corner Door / Door 90 Left
- To edit the Structure in more details:
To edit the depth of the corner structure, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLCORNER_DEPTH1 = 12
COMMON_WALLCORNER_DEPTH2 = 18
To edit back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_NAILER = Bottom Nailer Outside
COMMON_NAILER_TOP_HEIGHT = 6
COMMON_MEASURE_THICKNESS_NAILER = 1
To edit the thickness of panel, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Construction - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Decorative Wall Side With Notch 03
COMMON_DECORATIVE_SIDEPANEL_LEFT = Decorative Wall Side With Notch 03
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below,you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the clearances frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 1
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_BOTTOM_OVERLAY = 1
COMMON_TOP_OVERLAY = 1.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.8
To edit the door style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 8
COMMON_VDOOR_FRONT_ORIENTATION = HORIZONTAL
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
To edit the door center panel style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2.
Example:
COMMON_STYLE_WALLDOOR = Glass
COMMON_STYLE_WALLDOOR_2 = Mullion
To edit the handle style, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 21
COMMON_HANDLE_WIDTH = 5
COMMON_HANDLE_HEIGHT = 1
COMMON_HANDLE_DEPTH = 0.5
Tall Standard
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Tall. The tables in this document are divided into categories. So, if you want to build a Tall Standard item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_TALL_STANDARD_RECTANGULAR_STRUCTURE = Standard Tall
TEMPLATES_TALL_STANDARD_RECTANGULAR_CONFIG = 2 Drawers / Doors (CONFHEIGHT1)
- To edit the Structure in more details:
To edit back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 7
COMMON_MEASURE_THICKNESS_NAILER = 1
To edit the thickness of panel, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 05
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 05
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the articles Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 1
COMMON_TOEKICK_HEIGHT = 7
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_DECORATIVE_LEG_STYLE = Foot 30
COMMON_DECORATIVE_LEG_LEFT_BACK = True
COMMON_DECORATIVE_LEG_LEFT_FRONT = True
COMMON_DECORATIVE_LEG_RIGHT_BACK = True
COMMON_DECORATIVE_LEG_RIGHT_FRONT = True
COMMON_LEG_WIDTH = 5
COMMON_LEG_DEPTH = 5
COMMON_TOEKICK_HEIGHT = 6
To edit the style toekick and use a decorative style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_DECORATIVE_TOEKICK_STYLE = Decorative Toekick 27
To edit the style toekick and use a floating style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
Note: With this option, the item seems to be floating and there is no visual structure between it and the floor.
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the vertical sections, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_CONFHEIGHT1 = 40
Note: this attribute is used in cases where the configuration is separated by shelves.
COMMON_MEASURE_CONFHEIGHT1 = 20
COMMON_MEASURE_CONFHEIGHT2 = 20
COMMON_MEASURE_CONFHEIGHT3 = 20
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 2
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example 1:
COMMON_TOP_OVERLAY = 0.5
COMMON_CONFIG_OVERLAY_BOTTOM1 = 0.5
COMMON_CONFIG_OVERLAY_TOP1 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
Example 2:
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM2 = 0.5
COMMON_INTER_OVERLAY_TOP2 = 0.5
COMMON_INTER_OVERLAY_BOTTOM3 = 0.5
COMMON_INTER_OVERLAY_TOP3 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_TALL_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of doors, number of panels door and whether not the doors have a center stile, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Visibility.
Example:
COMMON_CUSTOMV_NUMFRONTDOOR1_1 = 2
COMMON_NUMPANEL_TALL_DOOR = 2
COMMON_TALL_DOORSTYLE = 12
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 322
COMMON_BASEDOOR_HANDLESTYLE = 322
COMMON_HANDLE_WIDTH = 2
COMMON_HANDLE_HEIGHT = 2
COMMON_HANDLE_DEPTH = 2
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_CUSTOMV_DOOR_ACCESSORY1_1 = Laundry Chrome Wire
COMMON_CUSTOMV_DOOR_ACCESSORY1_2 = Waste Bin
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1_1 = 10
COMMON_CUSTOMV_DOOR_ACCESS_HEIGHT1_1 = 15
COMMON_CUSTOMV_DOOR_ACCESS_DEPTH1_1 = 5
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1_2 = 10
COMMON_CUSTOMV_DOOR_ACCESS_HEIGHT1_2 = 15
COMMON_CUSTOMV_DOOR_ACCESS_DEPTH1_2 = 5
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_CUSTOMV_DOOR_ACCESSORY1_1 until COMMON_CUSTOMV_DOOR_ACCESSORY6_1
COMMON_CUSTOMV_DOOR_ACCESSORY1_2 until COMMON_CUSTOMV_DOOR_ACCESSORY6_2
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1_1 until COMMON_CUSTOMV_DOOR_ACCESS_WIDTH6_1
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1_2 until COMMON_CUSTOMV_DOOR_ACCESS_WIDTH6_2
Note: Remember to consult the attributes corresponding to the section that you are using, because the attributes related to custom config are separated by sections, for example: section 1, section 2, section 3 etc..
To edit the accessories position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_1 = 1
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINZ1_1 = 3
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_2 = 8
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINZ1_2 = 5
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_1 until COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX6_1
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_2 until COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX6_2
Note: Remember to consult the attributes corresponding to the section that you are using, because the attributes related to custom config are separated by sections, for example: section 1, section 2, section 3 etc..
To edit the shelves quantity and dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_QUANTITY_SHELF_1 = 5
COMMON_QUANTITY_SHELF_2 = 3
COMMON_SHELF_DEPTH_1 = 15
COMMON_SHELF_DEPTH_2 = 20
To edit the shelves visibility, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility
Example:
COMMON_SHELF_VISIBILITY_1 = False
COMMON_SHELF_VISIBILITY_2 = False
Note: If you have a configuration with more than one door, we have attribute for each of them, used from top to bottom:
COMMON_SHELF_VISIBILITY_1 until COMMON_SHELF_VISIBILITY_5
Note: Remember to consult the attributes corresponding to the section that you are using, because the attributes related to custom config are separated by sections, for example: section 1, section 2, section 3 etc..
To edit the drawer style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Style 2.
Example:
COMMON_DRAWERSTYLE_GEN = 12
COMMON_DRAWER_INSET = 1
COMMON_DRAWERSTYLE_GEN = 12
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 1
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 1
To edit the height of drawer front and drawer box, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning
Example:
COMMON_CUSTOMV_DRAWER_HEIGHT1_1 = 10
COMMON_CUSTOMV_MEASURE_DRAWERBOX_HEIGHT1_1 = 5
COMMON_CUSTOMV_MEASURE_DRAWERBOX_HEIGHT2_1 = 10
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom and the last drawer is calculated automatically:
COMMON_CUSTOMV_DRAWER_HEIGHT1_1 until COMMON_CUSTOMV_DRAWER_HEIGHT6_1
To edit the drawer box depth, use the attributes listed below, you can find them and in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_CUSTOMV_DRAWERBOX_DEPTH1_1 = 15
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_CUSTOMV_DRAWERBOX_DEPTH1_1 until COMMON_CUSTOMV_DRAWERBOX_DEPTH6_1
To edit the visibility of drawer box, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility
Example:
COMMON_CUSTOMV_DRAWERBOX1_1 = False
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_CUSTOMV_DRAWERBOX1_1 until COMMON_CUSTOMV_DRAWERBOX6_1
Example:
To edit the handle style and the dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWER_HANDLESTYLE = 107
COMMON_DRAWERHANDLE_WIDTH = 2
COMMON_DRAWERHANDLE_DEPTH = 2
COMMON_DRAWERHANDLE_HEIGHT = 1
To edit the handle quantity, use the attributes listed below, you can find them and in the article Attributes: Item Configuration - Quantity.
Example:
COMMON_CUSTOMV_DRAWER_PULL1_1 = 0
COMMON_CUSTOMV_DRAWER_PULL2_1 = 2
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_CUSTOMV_DRAWER_PULL1_1 until COMMON_CUSTOMV_DRAWER_PULL6_1
To add drawer box accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_CUSTOMV_DRAWERBOX_ACCESSORY1_1 = Paper Roll
COMMON_CUSTOMV_DRAWERBOX_ACCESSORY2_1 = Utility Tray Divider
COMMON_CUSTOMV_ACCESSORY_HEIGHT1_1 = 3
COMMON_CUSTOMV_ACCESSORY_HEIGHT2_1 = 5
Note: If you have a configuration with more than one drawer, we have attribute for each of them, used from left to right, from top to bottom:
COMMON_CUSTOMV_DRAWERBOX_ACCESSORY1_1 until COMMON_CUSTOMV_DRAWERBOX_ACCESSORY6_1
COMMON_CUSTOMV_ACCESSORY_HEIGHT1_1 until COMMON_CUSTOMV_ACCESSORY_HEIGHT6_1
Tall End Angle
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Tall. The tables in this document are divided into categories. So, if you want to build a Tall End Angle item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_TALL_END_STRUCTURE = End Angle Base
TEMPLATES_TALL_END_CONFIG = Door / Door for Tall End (CONFHEIGHT1)
To edit the Structure in more details:
To edit back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 10
COMMON_MEASURE_THICKNESS_NAILER = 1
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 1
To add decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 06
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 06
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the articles Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 1
COMMON_TOEKICK_HEIGHT = 7
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_DECORATIVE_LEG_STYLE = Foot 06
COMMON_DECORATIVE_LEG_LEFT_BACK = True
COMMON_DECORATIVE_LEG_LEFT_FRONT = True
COMMON_DECORATIVE_LEG_RIGHT_BACK = True
COMMON_DECORATIVE_LEG_RIGHT_FRONT = True
COMMON_LEG_WIDTH = 5
COMMON_LEG_DEPTH = 5
COMMON_TOEKICK_HEIGHT = 6
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example 1:
COMMON_TOP_OVERLAY = 0.5
COMMON_CONFIG_OVERLAY_BOTTOM1 = 0.5
COMMON_CONFIG_OVERLAY_TOP1 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
Example 2:
COMMON_TOP_OVERLAY = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM2 = 0.5
COMMON_INTER_OVERLAY_TOP2 = 0.5
COMMON_INTER_OVERLAY_BOTTOM3 = 0.5
COMMON_INTER_OVERLAY_TOP3 = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
To edit the vertical sections, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_CONFHEIGHT1 = 40
Note: this attribute is used in cases where the configuration is separated by shelves.
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 12
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of panels door, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Style 2.
Example:
COMMON_NUMPANEL_TALL_DOOR = 2
COMMON_TALL_DOORSTYLE = 12
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 322
COMMON_BASEDOOR_HANDLESTYLE = 322
COMMON_HANDLE_WIDTH = 2
COMMON_HANDLE_HEIGHT = 2
COMMON_HANDLE_DEPTH = 2
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_CUSTOMV_DOOR_ACCESSORY1 = Waste Bin
COMMON_CUSTOMV_DOOR_ACCESSORY1 = Metal Rack
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1 = 10
COMMON_CUSTOMV_DOOR_ACCESS_HEIGHT1 = 15
COMMON_CUSTOMV_DOOR_ACCESS_DEPTH1 = 5
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH2 = 10
COMMON_CUSTOMV_DOOR_ACCESS_HEIGHT2 = 15
COMMON_CUSTOMV_DOOR_ACCESS_DEPTH2 = 5
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_CUSTOMV_DOOR_ACCESSORY1 until COMMON_CUSTOMV_DOOR_ACCESSORY5
COMMON_CUSTOMV_DOOR_ACCESS_WIDTH1 until COMMON_CUSTOMV_DOOR_ACCESS_WIDTH5
To edit the accessories position, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_1 = 1
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINZ1_1 = 3
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINX1_2 = 8
COMMON_CUSTOMV_DOOR_ACCESS_ORIGINZ1_2 = 5
To edit the shelves quantity and dimension, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_QUANTITY_SHELF_1 = 5
COMMON_SHELF_DEPTH_1 = 15
Tall Corner Blind
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Tall. The tables in this document are divided into categories. So, if you want to build a Tall Corner Blind item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
- To edit the Structure in more details:
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Front Valance Vertical & Back Stretcher
COMMON_STYLECABINET_BACK = Grooved Back
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.75
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 2
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 05
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 05
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 1
COMMON_TOEKICK_HEIGHT = 5
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_DECORATIVE_LEG_STYLE = Foot 01
COMMON_DECORATIVE_LEG_LEFT_BACK = True
COMMON_DECORATIVE_LEG_LEFT_FRONT = True
COMMON_DECORATIVE_LEG_RIGHT_BACK = True
COMMON_DECORATIVE_LEG_RIGHT_FRONT = True
COMMON_LEG_WIDTH = 2
COMMON_LEG_DEPTH = 2
COMMON_TOEKICK_HEIGHT = 4
- To edit the Configuration in more details:
To edit the distance between the wall and filler, use the attribute listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DIMENSION_DEPTH_ADJACENT = 24
Note: It doesn't consider the COMMON_DISTANCE_CLEARANCE or COMMON_DISTANCE_OFFSET on the value to be defined.
To edit the filler visibility, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility.
Example:
COMMON_FILLER = False
To edit the width of openings (doors, drawers and etc) use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_CONFWIDTH1 = 20
To edit the offset dimension from wall, use the attribute listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DISTANCE_OFFSET = 10
Note 1: This attribute change the size of the structure and the configuration, but doesn't change the position of the filler.
Note 2: To edit the clearance from wall, but don't change the size of structure and configuration, only the filler position, use the attribute COMMON_DISTANCE_CLEARANCE.
Note 3: Only one of CLEARANCE or OFFSET attributes should be used,to avoid issues with the shape. The other must be 0.
To edit the width of the panel, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BLINDCORNER_STILE_WIDTH = 24
To edit the vertical sections, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_CONFHEIGHT1 = 50
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 12
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the style door and number of panels, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Style 2.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_WALL_DOORSTYLE = 12
COMMON_NUMPANEL_DOOR = 2
COMMON_NUMPANEL_WALL_DOOR = 2
To edit the handle style, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_TALLDOOR_HANDLESTYLE = 104
COMMON_HANDLE_WIDTH = 2
COMMON_HANDLE_HEIGHT = 2
COMMON_HANDLE_DEPTH = 2
To add the door accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Laundry Chrome Wire
COMMON_DOOR_ACCESS_DEPTH1 = 10
COMMON_DOOR_ACCESS_WIDTH1 = 7
COMMON_DOOR_ACCESS_HEIGHT1 = 22
To edit the accessories position, use the attributes listed below, you can find them and in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_DOOR_ACCESS_ORIGINX_1 = 3
COMMON_DOOR_ACCESS_ORIGINZ_1 = 3
Note: If you have a configuration with more than one door, we have attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESS_ORIGINX_1 until COMMON_DOOR_ACCESS_ORIGINX_8
Vanity Standard
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Vanity. The tables in this document are divided into categories. So, if you want to build a Vanity Standard item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_VANITY_STANDARD_RECTANGULAR_STRUCTURE = Standard Base
TEMPLATES_VANITY_STANDARD_RECTANGULAR_CONFIG = Doors / 3 Drawers
COMMON_STYLECABINET_TOP = Full Top
- To edit the Structure in more details:
To edit top and back style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Corner Blocks
COMMON_STYLECABINET_BACK = Grooved Back Outside
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 5
COMMON_MEASURE_THICKNESS_NAILER = 0.75
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
COMMON_STYLECABINET_TOP = Full Top
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 2
COMMON_CLEARANCE_BACK = 2
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 06
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 06
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 0.5
COMMON_TOEKICK_HEIGHT = 7
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_DECORATIVE_LEG_STYLE = Foot 01
COMMON_DECORATIVE_LEG_LEFT_BACK = True
COMMON_DECORATIVE_LEG_LEFT_FRONT = True
COMMON_DECORATIVE_LEG_RIGHT_BACK = True
COMMON_DECORATIVE_LEG_RIGHT_FRONT = True
COMMON_LEG_WIDTH = 3
COMMON_LEG_DEPTH = 3
COMMON_TOEKICK_HEIGHT = 6
To edit the style toekick and use the decorative style, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_DECORATIVE_TOEKICK_STYLE = Decorative Toekick 27
To edit the style toekick and use a floating style, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
Note: With this option, the item seems to be floating and there is no visual structure between it and the floor.
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the horizontal divisions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_CONFWIDTH1 = 15
COMMON_MEASURE_CONFWIDTH3 =15
Note: These attribute is used in cases where the configuration is separated by dividers.
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 2
To edit the vertical overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example 1:
COMMON_TOP_OVERLAY = 1.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.75
COMMON_INTER_OVERLAY_TOP1 = 0.75
COMMON_BOTTOM_OVERLAY = 1.5
Example 2:
COMMON_TOP_OVERLAY = 1.5
COMMON_INTER_OVERLAY_BOTTOM1 = 1.5
COMMON_INTER_OVERLAY_TOP1 = 1.5
COMMON_INTER_OVERLAY_BOTTOM2 = 1.5
COMMON_INTER_OVERLAY_TOP2 = 1.5
COMMON_INTER_OVERLAY_BOTTOM3 = 1.5
COMMON_INTER_OVERLAY_TOP3 = 1.5
COMMON_BOTTOM_OVERLAY = 1.5
To edit the horizontal overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_MIDDLE_HORIZONTAL_OVERLAY = 1.5
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 2
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of panel door, style door and whether or not the doors have a center stile, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Visibility.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_NUMPANEL_DOOR = 2
COMMON_BUTTDOORS = True
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEDOOR_HANDLESTYLE = 104
COMMON_HANDLE_WIDTH = 4
COMMON_HANDLE_HEIGHT = 0.5
COMMON_HANDLE_DEPTH = 1
COMMON_DOOR_INSET = 0.75
To add the door accessories and edit their dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DOOR_ACCESSORY1 = Metal Rack
COMMON_DOOR_ACCESS_HEIGHT1 = 15
COMMON_DOOR_ACCESS_DEPTH1 = 6
COMMON_DOOR_ACCESS_WIDTH1 = 12
Note: If you have a configuration with more than one door, we have an attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESSORY1 until COMMON_DOOR_ACCESSORY14
COMMON_DOOR_ACCESS_HEIGHT1 until COMMON_DOOR_ACCESS_HEIGHT8
To edit the accessories position, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_DOOR_ACCESS_ORIGINX_1 = 2
COMMON_DOOR_ACCESS_ORIGINZ_1 = 3
Note: If you have a configuration with more than one door, we have an attribute for each of them, used from left to right, from bottom to top:
COMMON_DOOR_ACCESS_ORIGINX_1 until COMMON_DOOR_ACCESS_ORIGINX_8
To edit the shelves quantity and dimension, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_VANITY_STANDARD_RECTANGULAR_SHELF = Shelf
COMMON_QUANTITY_SHELF = 1
COMMON_SHELF_DEPTH = 20
To edit the drawer style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWERSTYLE_GEN = 12
COMMON_DRAWER_INSET = 0.75
COMMON_DRAWERSTYLE_GEN = 12
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 1
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
COMMON_VDRAWER_FRONT_ORIENTATION = Horizontal
To edit the height of drawer front and drawer box, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_DRAWERBOX_HEIGHT = 6
COMMON_DRAWER01_HEIGHT = 8
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom) is calculated automatically, for example:
COMMON_DRAWER01_HEIGHT until COMMON_DRAWER14_HEIGHT
COMMON_MEASURE_DRAWERBOX_HEIGHT until COMMON_MEASURE_DRAWERBOX14_HEIGHT
To edit the drawer box depth, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_DEPTH = 10
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom):
COMMON_DRAWERBOX1_DEPTH until COMMON_DRAWERBOX6_DEPTH
To edit the visibility of drawer box, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility.
Example:
COMMON_DRAWERBOX1 = False
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX1 until COMMON_DRAWERBOX14
To edit the handle style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWER_HANDLESTYLE = 107
COMMON_DRAWERHANDLE_HEIGHT = 0.6
COMMON_DRAWERHANDLE_DEPTH = 1
COMMON_DRAWERHANDLE_WIDTH = 4
To edit the handle quantity, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWER_PULL_1 = 2
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWER_PULL_1 until COMMON_DRAWER_PULL_14
To add the drawer box accessories and edit the dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_ACCESSORY = Coffee Pod Insert
COMMON_ACCESSORY_HEIGHT1 = 1.5
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX_ACCESSORY until COMMON_DRAWERBOX9_ACCESSORY
COMMON_ACCESSORY_HEIGHT1 until COMMON_ACCESSORY_HEIGHT14
To edit the drawer style in multiple horizontal drawers or vertical drawers, use the attributes listed below, you can find them and their respective values in the article: Attributes: Item Configuration - Style 2.
Example:
COMMON_DRAWERSTYLE1 = 35
COMMON_DRAWERSTYLE2 = 22
COMMON_DRAWERSTYLE3 = 12
To edit a structure and add a Vanity Combo (legs, bottom shelf and back opening) use the attributes listed below, you can find them and their respective values in the article Attributes: Item Construction - Cabinet Vanity.
Example:
TEMPLATES_VANITY_STANDARD_RECTANGULAR_STRUCTURE = Vanity Combo 08
To edit the dimensions of the back opening in Vanity Combo, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_VANITY_STANDARD_RECTANGULAR_STRUCTURE = Vanity Combo 08
COMMON_BACKOPENING_HEIGHT1 = 5
COMMON_BACKOPENING_WIDTH1= 5
To edit the back opening position in Vanity Combo, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Positioning.
Example:
COMMON_BACKOPENING_POSITIONX1 = 3
COMMON_BACKOPENING_POSITIONZ1 = 20
Note: If you have a back panel with more than one opening, use the attributes listed below, used from left to right, from bottom to top:
COMMON_BACKOPENING_POSITIONX1 until COMMON_BACKOPENING_POSITIONX2
COMMON_BACKOPENING_POSITIONZ1 until COMMON_BACKOPENING_POSITIONZ2
Vanity Corner Square
All model attributes related to the chosen structure and configuration with their proposed values, can be found at Attributes: Item Construction - Cabinet Vanity. The tables in this document are divided into categories. So, if you want to build a Vanity Corner Square item, you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure and configuration into the template:
Example:
TEMPLATES_CABINET_VANITY_CORNER_90_LEFT = Standard Base
TEMPLATES_VANITY_CORNER_90_CONFIG = Square Corner Door / Drawer 90 Left
- To edit the Structure in more details:
To edit the depth of the corner structure, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Construction - Clearances.
Example:
COMMON_BASECORNER_DEPTH1 = 20
COMMON_BASECORNER_DEPTH2 = 15
COMMON_CLEARANCE_CORNER_BACK = 5
To edit the back style of the corner, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Construction - Cabinet Base.
Example:
TEMPLATES_BASE_CORNER_90_STRUCTURE = 90 Corner Base Straight Back
To edit top style, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_TOP = Corner Blocks
To edit the nailer style and dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLECABINET_NAILER = Nailers Outside
COMMON_NAILER_TOP_HEIGHT = 6
COMMON_MEASURE_THICKNESS_NAILER = 1
To edit the thickness of panels, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_THICKNESS_SIDE = 0.5
COMMON_MEASURE_THICKNESS_TOP = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_BOTTOM = 0.5
COMMON_MEASURE_THICKNESS_BACK = 0.5
COMMON_MEASURE_THICKNESS_DIAGONAL_BACK = 0.5
To edit the clearances, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_TOP = 1
COMMON_CLEARANCE_BACK = 2
To add the decorative panels and edit the dimensions, use the attributes below, you can find them and their respective values in the articles Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DECORATIVE_SIDEPANEL_LEFT = Base Panel 05
COMMON_DECORATIVE_SIDEPANEL_RIGHT = Base Panel 05
COMMON_MEASURE_THICKNESS_SIDE = 1
Note: This decorative panel will replace the standard side panel, so the thickness attribute remains the same.
To edit the toekick dimension, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Clearances.
Example:
COMMON_MEASURE_THICKNESS_TOEKICK = 0.5
COMMON_TOEKICK_HEIGHT = 7
COMMON_CLEARANCE_TOEKICK = 5
To edit the style toekick, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
COMMON_LEG_COMPOSITION_TYPE = Square Corner 01
COMMON_LEG_STYLE = Foot 10
COMMON_LEG_WIDTH = 2
COMMON_LEG_DEPTH = 2
COMMON_TOEKICK_HEIGHT = 4
To edit the style toekick and use a floating style, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Style 1.
Example:
COMMON_STYLE_TOEKICK = Floating Structure or Feet/Legs
Note: With this option, the item seems to be floating and there is no visual structure between it and the floor.
- To edit the Configuration in more details:
To edit the option of framed or frameless configuration, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
TEMPLATES_GENERAL_CAB_STYLE = Frameless
To edit the clearance frame, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Clearances.
Example:
COMMON_CLEARANCE_FRAME = 2
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_BOTTOM_OVERLAY = 1
COMMON_TOP_OVERLAY = 1.5
COMMON_INTER_OVERLAY_TOP1 = 0.5
COMMON_INTER_OVERLAY_BOTTOM1 = 0.8
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASE_DOORSTYLE = 12
COMMON_STYLEDOOR = Glass
COMMON_VDOOR_FRONT_ORIENTATION = HORIZONTAL
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 3
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
To edit the door center panel style, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2.
Example:
COMMON_STYLE_BASEDOOR = Mullion
COMMON_BASE_DOORSTYLE = 12
COMMON_NUMFRONTDOOR1 = 2
COMMON_NUMPANEL_DOOR = 2
To edit the handle style, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_BASEDOOR_HANDLESTYLE = 21
COMMON_HANDLE_WIDTH = 5
COMMON_HANDLE_HEIGHT = 1
COMMON_HANDLE_DEPTH = 0.5
To edit the drawer style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Quantity.
Example:
COMMON_DRAWERSTYLE_GEN = 12
COMMON_DRAWER_INSET = 0.75
COMMON_DRAWERSTYLE_GEN = 12
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 1
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 2
COMMON_VDRAWER_FRONT_ORIENTATION = Horizontal
To edit the height of drawer front and drawer box, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_DRAWERBOX_HEIGHT = 8
COMMON_DRAWER01_HEIGHT = 10
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom) is calculated automatically:
COMMON_DRAWER01_HEIGHT until COMMON_DRAWER14_HEIGHT
COMMON_MEASURE_DRAWERBOX_HEIGHT until COMMON_MEASURE_DRAWERBOX14_HEIGHT
To edit the drawer box depth, use the attributes listed below, you can find them in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX_DEPTH = 15
COMMON_DRAWERBOX1_DEPTH = 5
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom and the last drawer (from top to bottom) is calculated automatically, for example:
COMMON_DRAWERBOX1_DEPTH until COMMON_DRAWERBOX6_DEPTH
To edit the visibility of drawer box, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Visibility.
Example:
COMMON_DRAWERBOX1 = False
COMMON_DRAWERBOX2 = True
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX1 until COMMON_DRAWERBOX14
To edit the handles and the dimensions, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWER_HANDLESTYLE = 107
COMMON_DRAWERHANDLE_HEIGHT = 0.6
COMMON_DRAWERHANDLE_DEPTH = 1
COMMON_DRAWERHANDLE_WIDTH = 4
To add the drawer accessories and edit their dimension, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_DRAWERBOX1_ACCESSORY = Paper Roll
COMMON_DRAWERBOX2_ACCESSORY = Coffee Pod Insert
COMMON_ACCESSORY_HEIGHT1 = 1.5
COMMON_ACCESSORY_HEIGHT2 = 2
Note: If you have a configuration with more than one drawer, we have an attribute for each of them, used from left to right, from top to bottom:
COMMON_DRAWERBOX_ACCESSORY until COMMON_DRAWERBOX9_ACCESSORY
COMMON_ACCESSORY_HEIGHT1 until COMMON_ACCESSORY_HEIGHT14
To edit the shelves quantity and style, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Configuration - Quantity and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_SHELF_VISIBILITY = True
TEMPLATES_BASE_CORNER_90_SHELF = Shelf Square Corner Base
COMMON_QUANTITY_SHELF = 2
Wood Hoods
Straight Wood Hood
All model attributes related to the chosen Wood Hood with their proposed values, can be found at Attributes: Item Construction - Decorative Items. The tables in this document are divided into categories. So, if you want to build a Straight Hood you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure into the template:
Example:
TEMPLATE_DECORATIVE_WOODHOOD_STYLE = Straight 01
- To edit the Structure in more details:
To edit the dimensions, use the attributes listed below, you can find it in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_HOOD_HEIGHT = 10
COMMON_MEASURE_STRAIGHTCANOPY_DEPTH = 8
COMMON_INPUT = 6
To add an appliance, use the attributes listed below, you can find them in the articles Attributes: Item Configuration - Cross Catalog and Attributes: System Migration Flag, Validation Flag and Variable.
Example:
COMMON_DECORATIVE_TYPE_INTEGRATION_HOOD_FULLY_INTEGRATED = Cross
Editing the Configuration in more details:
To edit the overlays, use the attributes listed below, you can find them in the article Attributes: Item Construction - Catalog: Overhang, Overlays and Style.
Example:
COMMON_TOP_OVERLAY = 0.5
COMMON_BOTTOM_OVERLAY = 0.5
COMMON_SIDE_OVERLAY = 1
To edit the door style, door center panel style and dimensions of door rail and stile (when available), use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALL_DOORSTYLE = 72
COMMON_STYLEDOOR = Mullion
COMMON_MEASURE_DIMENSIONS_STYLES_RAIL_HEIGHT = 2
COMMON_MEASURE_DIMENSIONS_STYLES_STILE_WIDTH = 3
COMMON_VDOOR_FRONT_ORIENTATION = Horizontal
To edit the number of doors and whether or not the doors have a center stile, use the attributes listed below, you can find them and their respective values in the article Attributes: Item Configuration - Quantity, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Visibility.
Example:
COMMON_NUMFRONTDOOR1 = 2
COMMON_BUTTDOORS = True
To edit the handle style and door inset, use the attribute listed below, you can find them and their respective values in the article Attributes: Item Configuration - Style 1, Attributes: Item Configuration - Style 2 and Attributes: Item Configuration - Dimensioning.
Example:
COMMON_WALLDOOR_HANDLESTYLE = 323
COMMON_HANDLE_WIDTH = 3
COMMON_HANDLE_HEIGHT = 1
COMMON_HANDLE_DEPTH = 1.5
Range Wood Hood
All model attributes related to the chosen Wood Hood with their proposed values, can be found at Attributes: Item Construction - Decorative Items. The tables in this document are divided into categories. So, if you want to build a Range Hood you need to open this category and look for the required attributes as well as their proposed values.
- To edit the structure into the template:
Example:
TEMPLATE_DECORATIVE_WOODHOOD_STYLE = Range Wood Hood 25
- To edit the Structure in more details:
To edit the dimensions, use the attributes listed below, you can find it in the article Attributes: Item Configuration - Dimensioning.
Example:
COMMON_MEASURE_WIDTH3 = 5
COMMON_DEPTH3 = 10
COMMON_HEIGHT2 =10
To add an appliance, use the attributes listed below, you can find them in the articles Attributes: Item Configuration - Cross Catalog and Attributes: System Migration Flag, Validation Flag and Variable.
COMMON_DECORATIVE_TYPE_INTEGRATION_HOOD_FULLY_INTEGRATED = Cross
Additional Items
In the library, you can add additional items to modules. Examples of available attachments are shown below. They are divided into Base, Wall, and Tall. These same features are available for the corner modules, they follow the same logic.
Base Standard
- Adding Shelves into the base template:
To add and edit the shelf template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Base, Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Visibility.
Example:
TEMPLATES_BASE_STANDARD_RECTANGULAR_SHELF = Apron Shelf
COMMON_SHELF_VISIBILITY = False
COMMON_SHELF_DEPTH = 10
- Adding End Panel into the base template:
To add and edit the end panel left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Base and Attributes: Item Configuration - Dimensioning.
Example Left:
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDPANEL_L = Base Appliance Decorative Side Door End Panel
COMMON_BASE_ENDPANEL_HEIGHT_LEFT = 30
Example Right:
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDPANEL_R = Base Panel 15
COMMON_BASE_ENDPANEL_HEIGHT_RIGHT = 15
To add and edit the back end panel template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Base, Attributes: Item Configuration - Positioning and Attributes: Item Configuration - Dimensioning.
Example:
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDPANEL_B = Base Panel 07
COMMON_BASE_ENDPANEL_HEIGHT_BACK = 20
COMMON_BACKPANEL_POSITION_Y = Outside
- Adding End Filler into the base template:
To add and edit the end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Base and Attributes: Item Configuration - Dimensioning.
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDFILLER_L = Fluted Base Angled Filler 05
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDFILLER_R = Base Angled Extended Stile
COMMON_FILLER_WIDTH = 5
To add and edit the back end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Base and Attributes: Item Configuration - Dimensioning.
TEMPLATES_BASE_STANDARD_RECTANGULAR_BACKFILLER_R = Collum With Panel
TEMPLATES_BASE_STANDARD_RECTANGULAR_BACKFILLER_L = Collum With Panel
COMMON_GENERAL_DIMENSION_1 = 2
COMMON_DEPTH2 = 3
Wall Standard
- Adding Shelves into the wall template:
To add and edit the shelf template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall, Attributes: Item Configuration - Visibility and Attributes: Item Configuration - Dimensioning.
TEMPLATES_WALL_STANDARD_RECTANGULAR_SHELF = Shelf Wall Bookcase 2
TEMPLATES_WALL_STANDARD_RECTANGULAR_SHELF_02 = Bridge Shelf
COMMON_SECTION_2 = True
COMMON_SHELF_VISIBILITY = False
COMMON_SHELF_VISIBILITY_2 = False
COMMON_SHELF_DEPTH = 6
COMMON_SHELF_DEPTH_2 = 3
- Adding End Panel into the wall template:
To add and edit the end panel left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall.
Example:
TEMPLATES_WALL_STANDARD_RECTANGULAR_ENDPANEL_L = Wall Decorative End Door
TEMPLATES_WALL_STANDARD_RECTANGULAR_ENDPANEL_R = Wall Panel 05
To add and edit the back end panel template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall and Attributes: Item Configuration - Positioning.
Example:
TEMPLATES_WALL_STANDARD_RECTANGULAR_ENDPANEL_B = Wall Decorative End Door
COMMON_BACKPANEL_POSITION_Y = Outside
- Adding End Filler into the wall template:
To add and edit the end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall and Attributes: Item Configuration - Dimensioning.
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDFILLER_L = Fluted Base Angled Filler 05
TEMPLATES_BASE_STANDARD_RECTANGULAR_ENDFILLER_R = Base Angled Extended Stile
COMMON_FILLER_WIDTH = 5
To add and edit the back end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Wall and Attributes: Item Configuration - Dimensioning.
TEMPLATES_WALL_STANDARD_RECTANGULAR_BACKFILLER_R = Collum With Panel
TEMPLATES_WALL_STANDARD_RECTANGULAR_BACKFILLER_L = Collum With Panel
COMMON_GENERAL_DIMENSION_1 = 6
COMMON_DEPTH2 = 3
Tall Standard
- Adding Shelves into the tall template:
To add and edit the shelf template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Tall, Attributes: Item Configuration - Dimensioning and Attributes: Item Configuration - Visibility.
Example:
TEMPLATES_TALL_STANDARD_RECTANGULAR_SHELF_02 = Closet Shelf
TEMPLATES_TALL_STANDARD_RECTANGULAR_SHELF_03 = Shelf Wall Bookcase
COMMON_SECTION_2 = True
COMMON_SECTION_3 = True
COMMON_SHELF_VISIBILITY_2 = False
COMMON_SHELF_VISIBILITY_3 = False
COMMON_SHELF_DEPTH_2 = 10
COMMON_SHELF_DEPTH_2 = 12
- Adding End Panel into the tall template:
To add and edit the end panel left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Tall.
Example:
TEMPLATES_TALL_STANDARD_RECTANGULAR_ENDPANEL_L = Tall Decorative Door / Door / Door End Panel
TEMPLATES_TALL_STANDARD_RECTANGULAR_ENDPANEL_R = Tall Decorative Door / Door - 02 End Panel
To add and edit the back end panel template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Tall and Attributes: Item Configuration - Positioning.
Example:
TEMPLATES_TALL_STANDARD_RECTANGULAR_ENDPANEL_B = Tall End Panel 2
COMMON_BACKPANEL_POSITION_Y = Inside
- Adding End Filler into the tall template:
To add and edit the end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Tall and Attributes: Item Configuration - Dimensioning.
TEMPLATES_TALL_STANDARD_RECTANGULAR_ENDFILLER_R= Tall Recessed Filler
TEMPLATES_TALL_STANDARD_RECTANGULAR_ENDFILLER_L = Tall Filler C
COMMON_FILLER_WIDTH = 4
To add and edit the back end filler left and right template, use the attributes listed below, you can find them and their respective values in the articles Attributes: Item Construction - Cabinet Tall and Attributes: Item Configuration - Dimensioning.
TEMPLATES_TALL_STANDARD_RECTANGULAR_BACKFILLER_R = Collum With Panel
TEMPLATES_TALL_STANDARD_RECTANGULAR_BACKFILLER_L = Collum With Panel
COMMON_GENERAL_DIMENSION_1 = 2
COMMON_DEPTH2 = 4
General Finishes
In the library, you can edit layer finishes in a more generalized and also more specific way, that said, there are standard material attributes for items, which group several parts of a module, but there are also specific layers that can be used when necessary.
Layers and Finishes
To edit the layers, use the attribute listed below, you can find it and the respective values in the article Attributes: Item Configuration - Layers.
Example:
LA_DEFAULT_OPTION = common_factory_colors_artic
LA_DEFAULT_OPTION_FINISH = common_factory_woods_horizontal_oak
LA_DEFAULT_OPTION_FINISH_VERTICAL = common_factory_woods_vertical_oak
To edit the finish, use the attribute listed below, you can find it and the respective values in the article Attributes: Item Configuration - Layers.
COMMON_DEF_FINISH = FULL_FIN
If you want to edit some specific parts besides the default layer, you must define these layers, as in the example below, the attributes are also available in the article Attributes: Item Configuration - Layers.
Example:
LA_TOEKICK_EXTERIOR = common_factory_colors_champagne
LA_SIDE_EXTERIOR = common_factory_woods_raw