Use the 3D Authoring Viewer or Command Runner to generate plan-view geometries from a 3D model. Plan views help ensure consistency between 3D content and its 2D representations by generating geometry directly from the source model instead of redrawing it manually.
This article describes:
- Generating standard plan views with Command Runner
- Generating plan views, cross-sections, and additional geometries in the 3D Authoring Viewer
- Importing generated geometries into an item
Choosing the right workflow
| Workflow | Best used for |
|---|---|
| Command Runner | Quickly generating standard top and front plan views |
| 3D Authoring Viewer | Generating top, front, or side projections, creating cross-sections, and producing additional geometries such as cutouts |
Generate standard plan views with Command Runner
Use Command Runner when you need to quickly generate standard plan views. The Command Runner workflow generates:
- Top plan view
- Front plan view
The generated views are processed and applied to the item automatically.
Note: This workflow is intended for generating standard views only. It does not generate cutouts or other additional geometries.
Steps
- Open the item you want to update.
- Open Command Runner.
- Run GenerateOutlineFromItemCommand.
- Wait for the command to complete processing.
- Verify that the generated top and front plan views have been added to the item.
Generate geometries in the 3D Authoring Viewer
Use the 3D Authoring Viewer when you need more control over geometry generation or when you need additional geometries such as cutouts.
Generate plan-view projections
Edge projection creates a single-line projection of the model.
- Open the item in the Authoring Hub.
- Launch the 3D Authoring Viewer.
Open the geometry generation tools.
- Select the required view orientation:
- Top (XZ)
- Front (XY)
- Side (YZ)
- Generate the projection.
- Preview the generated result.
- Export the generated file.
Note: Each generated projection must be exported before it can be added to the item as geometry.
Generate cross-sections
Cross-section generation creates an outline based on a slice through the model.
- Open the item in the 3D Authoring Viewer.
- Select one of the available section planes:
- XY
- XZ
- YZ
- Position the section plane as required.
- Generate outline.
- Review the generated outline.
- Export the generated file. The file will be downloaded in .glb format.
Note: Cross-sections and edge projections are separate outputs. Export each result individually.
Import generated geometries
Files generated in the 3D Authoring Viewer are not added to the item automatically.
Import a plan view
- Open the item.
- Navigate to the Geometries area.
- Select the appropriate plan-view slot.
- Import the exported geometry file.
- Save your changes.
Import an additional geometry
Use this workflow for adding geometries such as cutouts after the export.
- Open the item.
- Under Geometries, navigate to Details.
- Create the required property.
- Upload the exported geometry file.
- Set the classification to cutOutTemplate if it's a cutout or choose from the detailType list.
- Save your changes.